Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

phenol formaldehyde resin

Status
Not open for further replies.
dpodraza

dpodraza

Chemical
Joined
Jan 24, 2007
Messages
2
Location
US
I am looking for a molding compound that is similar or a suitable alternative to one formerly made by Monsanto (Monsanto 588). The compound was a phenol formaldehyde resin (2 step Novolak that was 62% solids and 38% alcohol). No Hex-A or lime. I would appreciate any input on finding something similiar or a suitable substitute.

Thanks,
dpodraza
 
Status
Not open for further replies.

Similar threads

LJthien
  • Locked
  • Question Question
Will Acrylic resin paint stick to galvanized steels
Replies
6
Views
2K
Compositepro
Compositepro
chil wilson
  • Locked
  • Question Question
Resin Transfer Method
Replies
5
Views
268
Latexman
Latexman
zorin
  • Locked
  • Question Question
dissolving into resin
Replies
0
Views
150
zorin
zorin
chemengineerjunior
  • Locked
  • Question Question
Tank Cleaning - Non Phenolic Sour water
Replies
2
Views
302
mbt22
mbt22
msquared48
  • Locked
  • Question Question
Removing Formaldehyde
Replies
3
Views
145
msquared48
msquared48

Part and Inventory Search

Sponsor

Back
Top