Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

phenol formaldehyde resin

Status
Not open for further replies.
dpodraza

dpodraza

Chemical
Jan 24, 2007
2
I am looking for a molding compound that is similar or a suitable alternative to one formerly made by Monsanto (Monsanto 588). The compound was a phenol formaldehyde resin (2 step Novolak that was 62% solids and 38% alcohol). No Hex-A or lime. I would appreciate any input on finding something similiar or a suitable substitute.

Thanks,
dpodraza
 
Status
Not open for further replies.

Similar threads

LJthien
  • Locked
  • Question
Will Acrylic resin paint stick to galvanized steels 2
Replies
6
Views
2K
Compositepro
Compositepro
chil wilson
  • Locked
  • Question
Resin Transfer Method
Replies
5
Views
158
Latexman
Latexman
zorin
  • Locked
  • Question
dissolving into resin
Replies
0
Views
110
zorin
zorin
chemengineerjunior
  • Locked
  • Question
Tank Cleaning - Non Phenolic Sour water
Replies
2
Views
186
mbt22
mbt22
msquared48
  • Locked
  • Question
Removing Formaldehyde 2
Replies
3
Views
110
msquared48
msquared48

Part and Inventory Search

Sponsor

Back
Top Bottom