Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phase II Water Quality Compliance, small site!

Status
Not open for further replies.

GRANITE80

Civil/Environmental
Aug 9, 2006
22
Hi - I'm working on a very small site, where it appears our only method of storm water quality treatment will be underground, via a box like the ADS Baysaver or VortSentry. However, both of this are way over sized for my flow of 0.05 cfs! Do you know of anything else on the market that is an in-line product that handles smaller volumes and less-expensive? Thanks.
 
Replies continue below

Recommended for you

Some other approaches consist of a soak-away pit, infiltration trench, grassed swale, etc.

This design guide for stormwater may give you some ideas:


The local stormwater utility should be able to provide some guidance as to what type of designs are used locally.
 
Where's the site? This varies greatly by state.

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor