Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Permeability rates of plastics.
- Thread starter mhiggins
- Start date
A few years back I performed permeability testing for NASA - Marshall Space Flight Center. I tested films and seals.
In 1968 IITRI ( performed extensive permeability testing encompassing metals as well as non-metals for NASA. Parker Seals ( O-ring handbook has a lot of elastomeric permeability data (much of which is based on the IITRI study). IITRI would be the authority in this area. If they can't help, MSFC may be able to.
In 1968 IITRI ( performed extensive permeability testing encompassing metals as well as non-metals for NASA. Parker Seals ( O-ring handbook has a lot of elastomeric permeability data (much of which is based on the IITRI study). IITRI would be the authority in this area. If they can't help, MSFC may be able to.
Hi, exist best infomation in the site of EVAL , I don´t sure but the site is http//another site is the DUPONT. I work in coextrusion with barrier materials in Venezuela south america.
Best Regards
Best Regards
this may help you
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Helpful tip