Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

periodic boundary conditions

Status
Not open for further replies.
perzo84

perzo84

Mechanical
Joined
Mar 13, 2008
Messages
22
Location
GB
Hi

I have a problem with applying periodic boundary condition. I have used *EQUATION in constraints for opposite nodes and surfaces. But I still have some problem with that for sure I making some simple mistake. If anyone could look at my model and find problem. Abaqus version 6.9-1 .
Thanks a lot.
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
AC1999
  • Locked
  • Question Question
NO FLOW boundary condition
Replies
1
Views
415
FEA way
FEA way
Yunus9696
  • Locked
  • Question Question
2D-Axisymmetric equivalent boundary conditions of a real 3D problem
Replies
1
Views
315
FEA way
FEA way
FBMeca
  • Locked
  • Question Question
Boundary Conditions on Deformed Configuration
Replies
18
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top