Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Penstock design for Microhydro
- Thread starter tecnico
- Start date
HamishMcTavish
Nuclear
If you are in the USA you may not be able to access this but otherwise you could try
"Internal Flow Systems" by Don S Miller, British Hydromechanics Research Association (BHRA) Information Services, 1986.
Regards, David.
"Internal Flow Systems" by Don S Miller, British Hydromechanics Research Association (BHRA) Information Services, 1986.
Regards, David.
Hello,
For penstocks look to the American Water Works Association Standard, AWWA M-11. Also the American Iron and Steel Institute has at leat one Penstock publication (and 3 other associated piping pubs). Also the US Bureau of Reclamation has many publications that will provide good input for you.
Regards, John.
For penstocks look to the American Water Works Association Standard, AWWA M-11. Also the American Iron and Steel Institute has at leat one Penstock publication (and 3 other associated piping pubs). Also the US Bureau of Reclamation has many publications that will provide good input for you.
Regards, John.
- Status
Similar threads
- Locked
- Question
