Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pattern Display Parameters-Help

Status
Not open for further replies.
JTD64

JTD64

Automotive
Joined
Nov 10, 2003
Messages
7
Location
US
Hello,

I am having trouble locating where to permanently turn off
"Pattern Display Parameters:

Origin marker Display

Max/Min Box Display

Control Point Display

I would like to have these always off.
I don't where to do that in the .def file.

Thanks!
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Through curves command // Blade help
Replies
0
Views
342
Nutria360
N
D
  • Locked
NX Help
Replies
2
Views
2K
Toost
Toost
SSO Contractor
  • Question Question
Distance Measure within an active command i.e., Extrude, Pattern etc. is no longer associative?
Replies
4
Views
4K
jimiherf
jimiherf
multicaduser
  • Locked
  • Question Question
sketch fill pattern
Replies
1
Views
790
multicaduser
multicaduser
jrhagen
  • Locked
  • Question Question
Need help decoding meaning of error codes
Replies
4
Views
3K
jrhagen
jrhagen

Part and Inventory Search

Sponsor

Back
Top