As a USA manufacturer we have a vessel that is going to Alberta that is registered under a generic design. We placed a nozzle at an incorrect orientation. Our AI has approved the patching of the hole and placing the nozzle in the correct location. Should an Alberta SCO have an issue with this patch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Patching a Vessel for Alberta
- Thread starter ENG2194
- Start date
- Thread starter
- #4
Marty007 you are correct. I posted here because ABSA generally takes weeks to respond but they responded very quickly. They stated as long as it is approved by your AI and you conduct whatever RT you are claiming on the weld of the patch it is okay.
- Status
Similar threads
