Part Family Righthand

[RobertatBE]

I have a part family with Left Hand and Right Hand members. The problem is when I go into the part family spreadsheet and try to verify the parts the Right Hands made with a mirror body and added to excel sheet with the mirror tab don't verify or create they just say internal error. I have restarted NX, my computer, deleted and readded the mirror, and cleaned up the part with part cleanup. Does anyone know what could cause this and how to fix it? Everything runs fine on the left hand Parts.

 

[phillpd]

Verify should work, Apply will give the error.

NX 6.0.5.3 (NX 8.5 Testing)
Windows 7 64

 

[RobertatBE]

Apply Values, Verify Part, and Create part all fail the first 2 give an internal error and create gives some other error.

 

[JohnRBaker]

Without the actual part file it would difficult to impossible to say what the problem might be.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.