Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Part dimension so big selecting faces fails?

  • Thread starter Thread starter spacely
  • Start date Start date
S

spacely

Guest
Has anyone seen this effect in NX7.5.5...

Is it possible to make the physical dimension of a plane so large that you cannot reliably select it using the mouse? You can hover over it, but it doesn't highlight.
 
You must log in or register to reply here.

Similar threads

CAD2015
  • Locked
  • Question Question
Dimension representation.....
Replies
4
Views
3K
ghostdigital
ghostdigital
CAD2015
  • Locked
  • Question Question
NX Sketch dimension.....
Replies
2
Views
2K
CAD2015
CAD2015
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
CAD2015
  • Question Question
Sketch dimension shown on drawing..............
Replies
2
Views
2K
CAD2015
CAD2015
hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS

Part and Inventory Search

Sponsor

Back
Top