Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

paramters for time history analysis in ROBOT

Status
Not open for further replies.
lvkb

lvkb

Civil/Environmental
Joined
Oct 13, 2004
Messages
21
Location
GB
I am trying to do a linear time history analysis in ROBOT and I am confused about the damping parameters I have to put in. For the modal decomposition method is the damping parameter that has to be input the logarithmic decrement (delta) or xi (where delta = 2*pi*xi)?

Thanks
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
407
SWComposites
SWComposites
Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
0
Views
2K
mariyan.vt
M
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV

Part and Inventory Search

Sponsor

Back
Top