Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

parametric study on 3d sketch 1

Status
Not open for further replies.
skr3178

skr3178

Mechanical
Joined
Sep 5, 2020
Messages
34
Location
US
Hi,

Is it possible to perform a parametric study on the geometry dimensions of a 3d sketch in abaqus?
Currently, I am importing the 3d geometry from solidworks and creating wire by eliminating certain edges.
Thanks and sincerely,
Skr3178
 
 https://files.engineering.com/getfile.aspx?folder=135299a0-1354-4ea4-88e8-9b65bea2d812&file=Import_from_solidworks.pptx
Sort by date Sort by votes
This should be possible with Python scripting or, in this case even better, Isight offered as additional software. It supports multiple types of modules, including SolidWorks and Abaqus.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
3D HASHIN VUMAT
Replies
1
Views
2K
FEA way
FEA way
swahlgren
  • Locked
  • Question Question
Abaqus parametric study help
Replies
8
Views
469
swahlgren
swahlgren
IcarusAero223
  • Locked
  • Question Question
3D composite coupon convergence issue
Replies
5
Views
3K
FEA way
FEA way
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
IcarusAero223
  • Locked
  • Question Question
XFEM in Abaqus/Standard for 3D CFRP layup - nodal level set value error
Replies
9
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top