Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Parametric Analysis with Pro/Mechanica

Status
Not open for further replies.
qwertyyuiop

qwertyyuiop

New member
Jun 17, 2003
12
Hi I'm trying to run a parametric study with Pro/Engineer_Pro/Mechanica, but the study stops with a message "Starting ProEngineer in the background"

Can anyone help me? Wherw can I find a tutorial?

Thanks to all
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
194
SWComposites
SWComposites
mohamed hassan 2014
  • Locked
  • Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
547
mohamed hassan 2014
mohamed hassan 2014
Stress_Eng
  • Question
FEM Contact Analysis Variables
Replies
17
Views
12K
Stress_Eng
Stress_Eng
oharag11
  • Locked
  • Question
Modeling/simulating thermal vias - PCB/Electonic thermal analysis?
Replies
0
Views
628
oharag11
oharag11
Facundo L. Pfeffer
  • Locked
  • Question
Correct way to perform nonlinear buckling analysis
Replies
6
Views
1K
centondollar
centondollar

Part and Inventory Search

Sponsor

Back
Top Bottom