Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pam crash user material modelling

Status
Not open for further replies.
PAMSAFE

PAMSAFE

Mechanical
Joined
Feb 1, 2007
Messages
1
Location
BE
Hi,
My present task is to implement user material subroutine for all explicit codes like PAM-CRASH, LS-DYNA, RADIOS etc. I will begin with pam-crash. Does any of you know or worked in that area.
Thanks.
 
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question Question
Rutman Fastener Modelling in Patran
Replies
2
Views
3K
Alex Szatmary
Alex Szatmary
F
  • Locked
  • Question Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
G
  • Locked
  • Question Question
Modelling a post-tensioned stone arch or beam in Strand7
Replies
3
Views
2K
Gigi2000
G
InesGomes
  • Locked
  • Question Question
Modelling plasticity of polymer material
Replies
4
Views
451
swimfar
swimfar
Jb2024
  • Locked
  • Question Question
FE modelling of three-edge supported plate under simply-support
Replies
11
Views
1K
jhardy1
jhardy1

Part and Inventory Search

Sponsor

Back
Top