Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

P.Vessels Nozzle loads with exp.joints

Status
Not open for further replies.
SPLIT

SPLIT

Mechanical
Joined
Dec 21, 2002
Messages
57
Location
CL

In streight pipe with a e.joints, the pressure trust transmited to the anchors is P*A

In dischae nozzle of a púmp , compressor or turbine, the pressure trust is P*A or P*( ex.joint bellows transversal area - pipe internal area ) ?

Regards,


SPLIT
 
Status
Not open for further replies.

Similar threads

TomoB
  • Locked
  • Question Question
Sockolet Nozzle - FE cylindrical shell model
Replies
0
Views
1K
TomoB
TomoB
SmallInfo
  • Locked
  • Question Question
How to Control Nozzle Loads?
Replies
1
Views
660
LittleInch
LittleInch
az5333
  • Locked
  • Question Question
ANSI Pump Allowable Nozzle Loads Vs Actual Loads
Replies
1
Views
579
Nicolas B
Nicolas B
Babak3
  • Locked
  • Question Question
Using stiffeness in the nozzle of the vessel
Replies
2
Views
1K
StressGuy
StressGuy
mechengineer
  • Locked
  • Question Question
pressure thrust load with using Caeser II
Replies
4
Views
1K
richay
richay

Part and Inventory Search

Sponsor

Back
Top