Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Control Nozzle Loads?

Status
Not open for further replies.

SmallInfo

Petroleum
Oct 30, 2017
104
Hi Experts,
I am practicing CAESAR II and trying to control nozzle loads under allowable which is maximum 5000 lb, spent two days on this line but no luck, it seems impossible for me.
Line is in operation and working fine, supports are same as on site. Caesar file is attached.
Looking for help to learn, thanks in advance

case1_r6d2bl.jpg
 
Replies continue below

Recommended for you

What nozzle loads.

No one is going to look through your Caesar file so you need to give us a bit more than one not very helpful snapshot of two lines and no nozzles with no dimensions, pressures, temperatures, forces or indeed anything actually useful....

My guess is that in reality either the nozzle is accepting a lot more than 5000lbs force (X,Y or Z?) or there is a lot more flexibility than the analysis is predicting.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor