Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

P-delta and soil-structure interaction in SACS?

Status
Not open for further replies.
DDP

DDP

Structural
Joined
Apr 23, 2002
Messages
38
Location
US
If there is a way to do P-delta and Soil-structure interaction at the same time in SACS, I have not figured it out. Is it possible to do this? Do other programs allow a simultaneous p-delta and ssi interaction?
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
400
SWComposites
SWComposites
netsonicyxf
  • Locked
  • Question Question
Why the symmetrical structure under self weight has unsymmetrical deformation?
Replies
3
Views
3K
netsonicyxf
netsonicyxf
H
  • Locked
  • Question Question
Proper way of extracting component and bolt forces in an assembly
Replies
10
Views
4K
SWComposites
SWComposites
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
4K
rb1957
rb1957
rickyrt
  • Locked
  • Question Question
Impact analysis on flexible truss structure
Replies
0
Views
219
rickyrt
rickyrt

Part and Inventory Search

Sponsor

Back
Top