What effect would a 70% sulfuric acid solution have on a 1 1/2 inch schedule 10 20cb3 butt weld that the root has been slightly oxidized (sugared) due to contact with oxygen caused by insufficient internal purge. The root was not actually rough and porous looking just dark greyish in appearance. What type of accelerated corrosion if any could this lead to. Thank you for any input.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
oxidation of 20cb3
- Thread starter welder123
- Start date
Similar threads
- Question
- Question