zappedagain
Electrical
I have a customer who is requesting operation at 100% relative humidity, non-condensing, over a 35-120F (2-49C) temperature range. This is going to be in a controlled environment, so I expect this customer has valid reasons for requiring this range (exotic processes). My design is presently spec'd for operation over 10-90% RH, -10C to 70C.
If he said condensing then I would have to conformal coat my PCBs and go down that path. What concerns are there for non-condensing RH?
Z
If he said condensing then I would have to conformal coat my PCBs and go down that path. What concerns are there for non-condensing RH?
Z