Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

opening acad2000 dwgs in R14.

Status
Not open for further replies.

bdike

Industrial
Joined
Jan 9, 2002
Messages
19
Location
US
Is this possible?
 
Nope. Have your client save the drawing back as R14 and resend it to you.
 
No, but if you download the newest version of intelliCAD you can view, edit, and save back into R14 format. You'll also find that the command structure is the same if you play with it.
 
hello,
ya its possible as you are opening the word documents.
after drawing when ever you want to save it. click file---save as.when you choose save as the n a dialog box opens.annd give the appropriate name and choose format autocad 14.pls tell me if you under stand it or not
 
You could alternatively use VoloView to view 2002, 2000, R14, R13, R12, R11 & R10 drawings. You can create markups, plot, manipulate layers, zoom, pan, etc... only you cannot change the original drawing. There is also a routine in the migration assistance to batch convert between 2002, 2000, R14 & R13. Not sure if it will work on R14 installations though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top