Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
open pro/e file in autocad and/or microstation
- Thread starter youngEIT
- Start date
Now just do the same on AC and MS to see what you can open. Forget about Pro/E .prt, .asm, .drw extensions, these are native Pro/E and don't open anywhere else.
IGES, DXF and DWG should be OK in most applications, once you export them from Pro/E.
Steve
IGES, DXF and DWG should be OK in most applications, once you export them from Pro/E.
Steve
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question