Oloid composite surface issue

[Figsomes]

I am trying to make an Oloid View attachment 2334. I saw someone create one of these with Onshape using two sketches followed by a composite curve joining to the two sketches to make the surface feature geometry. Tutorial reference here. I tried doing this with two 2d sketches, it didn't work, so I tried it again with two 3d sketches and it still did not work. When I go to the composite curve I do not receive an error when trying to finish off the surface feature by pressing the green X, but it does nothing instead. It doesn't advance me past that feature such that I can continue on with my model, it just sits there as if it's waiting for me to add another curve to the composite.

I am using solidworks 2013. My solidwork part files are below

Two 2d sketches attempt
Two 3d sketches attempt

( I was unable to upload the files directly to the forum using the manage attachments option so I have provided links to the solidwork parts )