Chris0164
Mechanical
- Aug 18, 2005
- 21
Hi guys,
We have to specify some mechanical equipment (deck crane, loading arms, inside fuel tank, etc,,) for an offshore platform (no oil rig) in the North Sea. We have some DNV standards but where in heaves sake can I find the min and max temperatures at sea and wind loads at certain heights, Platform is located in UTM Zone 31 (WGS84) but does that give everything ?? I only see this as a longitudional reference but do I still have to define the horizontal reference ?? Platform for the coast of Belgium
Is it sensible to desing the inside equipment (HVAC on board) also for the outside temperatures in case the HVAC does not workor are there rules for this.
Thanks in advance
Kind Regard,
Chris
We have to specify some mechanical equipment (deck crane, loading arms, inside fuel tank, etc,,) for an offshore platform (no oil rig) in the North Sea. We have some DNV standards but where in heaves sake can I find the min and max temperatures at sea and wind loads at certain heights, Platform is located in UTM Zone 31 (WGS84) but does that give everything ?? I only see this as a longitudional reference but do I still have to define the horizontal reference ?? Platform for the coast of Belgium
Is it sensible to desing the inside equipment (HVAC on board) also for the outside temperatures in case the HVAC does not workor are there rules for this.
Thanks in advance
Kind Regard,
Chris