Is it possible to run NX9 and TC8.3 or do we need TC9 ?
Regards
Didier Psaltopoulos
Regards
Didier Psaltopoulos
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX9 and TC8.3
- Thread starter PSI-CAD
- Start date
Hi Didier...
According to the release notes you need TC9.1.2.4(or higher) or TC10.1.0.1(or higher)
Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
According to the release notes you need TC9.1.2.4(or higher) or TC10.1.0.1(or higher)
Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
- Thread starter
- #3
Hi Ronald,
Thanks for this information.
I am doing cad trainings in france and I am learning by myself Teamcenter for my own knowledge. So, I have NX6 to NX9 on my laptop
Actually, I have TC8.3 with NX7.5
Is it possible and easy to have TC8.3/NX7.5, TC9/NX8.5 and TC10/NX9 on the same laptop ?
TIA
Regards
Didier Psaltopoulos
Thanks for this information.
I am doing cad trainings in france and I am learning by myself Teamcenter for my own knowledge. So, I have NX6 to NX9 on my laptop
Actually, I have TC8.3 with NX7.5
Is it possible and easy to have TC8.3/NX7.5, TC9/NX8.5 and TC10/NX9 on the same laptop ?
TIA
Regards
Didier Psaltopoulos
Hi Didier.
Having several different NX versions installed certainly is possible. I never tried it but doing the same with TC shouldn't be a problem I guess.
To avoid clashes with environment settings in TC you might need to provide different configuration files .But you can ofcourse try it first.
Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
Having several different NX versions installed certainly is possible. I never tried it but doing the same with TC shouldn't be a problem I guess.
To avoid clashes with environment settings in TC you might need to provide different configuration files .But you can ofcourse try it first.
Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5
- Status
Similar threads
