NX8.0 Change Dimension text to horizontal and as a tolerance

[Bogdan1985]

Hi Forum Friends,

I like to change a Feature of Size, vertical, along a vertical edge to a horizontal tolerance information on the same place where the dimension text of vertical was before.

I know, it is normally not possible, but in this case the Engineer needs an additional view for the machine shop guys.

See attached files.

1.) wish-horizontal_dim_w_tol.jpg shows the original
2.) wish-horizontal_dim_w_tol_2vert.jpg, shows what I like. The numbers are phantasy but I like to have this style.

Something changes here in the upload, I hope you can see this.

Thanks Bogdan

 

[JohnRBaker]

There's only one image, the second or 'after' image. I don't see the 'before' image.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[Bogdan1985]

Ok, I upload now the drawing before. I have no idea why it not works yesterday.

 

[kukelyk]

Try this way:

----
kukelyk

 

[kukelyk]

..and this:

----
kukelyk

 

[Bogdan1985]

Thank you kukelyk, maybe there is no way to make the text horizontal, I attempted it yesterday again without success. Have a nice Sunday.

 

[Toost]

Read. Kukelyk's both replies. Again. He has answered your questions.

Regards,
Tomas