Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX3 DRAFTING QUESTION

Status
Not open for further replies.
EngMfg1

EngMfg1

Aerospace
Dec 9, 2004
40
How do I anchor one of the corners on part list spread sheet to geometry on a drawing template example a point or an end point on a line.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
goto
parts list
style
sections
Alignment Position
set it as desired
then
parts list
origin
Point Constructor
choose your alignment point


good57morning@netzero.com
 
Upvote 0 Downvote
its late so i dont have time to figure this site out. Please if anyone can give me some advice please do so.

Im thinking of going to be a drafts man and also learning inventor. I am a graphic designer and would like to go in desing products. Can (anyone) any engineers in these fields if its worth pursuing and how jobs availability, pay etc..........THANKS!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

hmichel
  • Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
3
Views
4K
SDETERS
SDETERS
3dr
  • Locked
  • Question
Drafting Files with mixed units failure, NX11
Replies
3
Views
1K
Toost
Toost
Asieros
  • Locked
  • Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
623
Asieros
Asieros
Kenja824
  • Locked
  • Question
NX2027 - Toolbars Question
Replies
0
Views
249
Kenja824
Kenja824
John-FR
  • Locked
  • Question
Question: How to make a vector based PDF
Replies
1
Views
1K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top Bottom