Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX12_ lathe cycloidal processing?
- Thread starter Joe Chen
- Start date
You might want to try to rename your .png file & upload it again. I get an error when trying to download it.
Tim Flater
NX Designer
NX 11.0.2.7 MP11 Rev. A
GM TcE v11.2.3.1
GM GPDL v11-A.3.5.1
Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
Tim Flater
NX Designer
NX 11.0.2.7 MP11 Rev. A
GM TcE v11.2.3.1
GM GPDL v11-A.3.5.1
Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
Uploaded file names with special characters aren't downloadable. Not sure why there's no upload filter, but there it is.
What characters certainly work: A-Z, a-z, 1-9, 0, -, and I'm pretty sure, _.
Ones that certainly don't work: &, ?, /, and probably any that are usually located above numbers on the keyboard.
What characters certainly work: A-Z, a-z, 1-9, 0, -, and I'm pretty sure, _.
Ones that certainly don't work: &, ?, /, and probably any that are usually located above numbers on the keyboard.
- Status
Similar threads
- Locked
- Question