nx environment sketches list order

[Ehaviv]

Hi
Can someone help in this
when I reorder the sketches in the part navigator
the order in the environment sketches list do not change.
Thanks in advanced

 

[mathisudar2007]

Hi,

May be because of time stamp order.Please deactivate the dependent features if any and then try it out.

Thanks,
Mathi K

 

[Ehaviv]

I clear my question
with timestemp checked I create a sketch and draw one circle
I exit sketch task environment and create another sketch
and draw a rectangle with no constraint and exit sketch task environment
now in part navigator i have 2 sketches in this order
sketch0000
sketch0001
this also seen in the same order in sketch task environment

now I drag sketch0000 to be below sketch0001 so in part navigator I have
this order
sketch0001
sketch0000
but in sketch task environment the order is still
in this order
sketch0000
sketch0001

and I expect that the order to be the same as part navigator

Thanks in advanced

 

[cowski]

What version of NX are you using?
I don't see the behavior you describe in either NX 8.5.3.3 or NX 9.0.3.4

www.nxjournaling.com

 

[Ehaviv]

I'm using nx6

I mean in the drop down list window next to task enviroment flag
theire the list of sketches refuse to change when I change
the order in the part navigator the drop down window list is the same.

Thank you very much for your interest in helping

 

[cowski]

I believe that the drop down list is sorted alphabetically and has no relation to the part navigator. I suggest giving the sketch a meaningful name when you are in the sketch task application; this makes the part navigator and the drop down easier to use.

www.nxjournaling.com

 

[Ehaviv]

Cowski I'm Thank you.

 

[jerry1423]

Is the sketch that was created second somehow dependent on the first sketch?

Jerry J.
Milwaukee Electric Tool

http://www.milwaukeetool.com/

 

[Ehaviv]

Hi Jerry

If the secobd sketch dependent on the first sketch
Nx Not let you reorder them in the part navigator

thanks