NX Cross section isn't (dynamically) updating after Datum Change

[Soloturk]

reference: thread561-370691

Hello,
I often create x-secs in NX by using pre-defined Datum(s)of mine. But once those datums are being altered (new angle, distance etc.), I can't see simultaneously the effect on the x-sec. Instead I need to go the x-sec window back and select (altered) "my Datum" again.

Is it possible to create dynamically updatedable x-sec linked to datums?

 

[cowski]

Is it possible to create dynamically updatedable x-sec linked to datums?

Not that I'm aware of. The dynamic clip section isn't a feature.

www.nxjournaling.com

 

[jerry1423]

I have a suggestion.
Instead of taking the cross section with the plane and solid bodies, try creating a cross section with section curves and the plane that will be associative [as long as "associative" is checked ON] when the plane is moved.

Jerry J.
UGV5-NX1884

 

[PSI-CAD]

Hi,

I didn't try it but maybe the PMI section view is associative with the plane.


Regards
Didier Psaltopoulos

http://www.psi-cad.fr