NX 9.0 problem of viewing edges

[Kaan01]

Hello everyone,
i have a problem with my nx 9.
With nx 8.5 i didn't have this problem.

On my working part, All holes, fillet edges looks like that.
On my notebook it's same.
I've quadro FX4800 , quadro k5000m.
How can i solve my problem?

 

[cubalibre000]

Have you open the assembly in lightwegt mode ?
If yes, it's normal, but with some setting you can view better using a new setting added in NX9.

Thank you...

Using NX 8 and PDM RuleDesigner

 

[Kaan01]

Nope, i never use lightweight assmbly mode.

 

[cubalibre000]

Take a look at Fundamentals - Display facet enhancements in the What's New Guide.
There are some new preferances for how the facets are displayed, based on the view or the part.

Thank you...

Using NX 8 and PDM RuleDesigner

 

[JohnRBaker]

...i never use lightweight assmbly mode.

Why not?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[Kaan01]

I suppress the sub-assamblies that i rarely use.
I didn't have performance problems yet. If i have problems on performance in future, i may use.

 

[Kaan01]

i still couldn't solve my problem.
There are hundreds of settings about "facet".
If i try all of them it'll take hours.
Am i only the one who has this problem?

 

[Arkance/PhoeNX]

If you have access to Siemens GTAC via a webkey account, there is a document that explains what you want.

Search for "Improving Edge Display Quality In The Graphics Display".


Anthony Galante
Senior Support Engineer

NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3
NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.1

 

[Kaan01]

i solved my problem with this way.
Thank you for help.

 

[jerry1423]

so you changed the resolution ?

 

[Kaan01]

yes...