NX 8.5 drafting

[aleksandar81]

Hallo everyone, I have few questions about drafting in NX. For picture 1.

http://postimg.org/image/t1b9o70tb/

1. Is it possible to make two positions of the handle like in the picture?
2. Cross section B6?
3. Line J1?

For picture 2.
Where are the settings for the intersection line like the one on the second section?

http://s12.postimg.org/jf0gp10vx/image.jpg

 

[Xwheelguy]

I cannot view either of your images because my company is blocking the site you're using to host the images. I'd suggest uploading the images to this website so others who might be able to help might not have the same issue as I am.

Tim Flater
NX Designer
NX 9.0.3.4 Win7 Pro x64 SP1
Intel Xeon 2.53 GHz 6GB RAM
NVIDIA Quadro 4000 2GB

 

[aleksandar81]

OK.

Picture 1

Picture 2