RudiGruber
Mechanical
- May 11, 2016
- 1
Hello,
First of all I would like to say hello to all of you - this is my very first post at this forum. I hope that I will be able to help some of you basing on (pretty small) knowledge
I am taking my first steps in Manufacturing module in NX 8.5. Right know I would like to simulate a machining process using machine code simulate function. The problem is that machine code simulation and tool path simulation don't seem to be align with each other ( You may notice the problem at the attached printscreen). Not sure if I am right but it seems that one of the coordinate system is displaced. Anyone could give me some advise how to deal with this kind of issue? I hope that attached screens will fully discribe the problem. Thank You in advance for Your help.
![URL]](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://prntscr.com/b2vkfa[/URL])
![URL]](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://prntscr.com/b2vlh8[/URL])
First of all I would like to say hello to all of you - this is my very first post at this forum. I hope that I will be able to help some of you basing on (pretty small) knowledge
I am taking my first steps in Manufacturing module in NX 8.5. Right know I would like to simulate a machining process using machine code simulate function. The problem is that machine code simulation and tool path simulation don't seem to be align with each other ( You may notice the problem at the attached printscreen). Not sure if I am right but it seems that one of the coordinate system is displaced. Anyone could give me some advise how to deal with this kind of issue? I hope that attached screens will fully discribe the problem. Thank You in advance for Your help.