Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX 5 ordinate dims
- Thread starter jerry1423
- Start date
- Thread starter
- #2
JohnRBaker
Mechanical
Well, using NX 5.0.6.3, I had NO problem whatsoever re-associating an Ordinate Dimension. Note that I only tried this with dimensions created using the new updated Ordinate Dimension functionality introduced in NX 4.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #4
Since none of the dimensions are associated I believe all I need to do is respecify the origin, and that will fix most of my problem.
To respecify the origin I will need to activate the oridinate set, but since none of the dimensions are associated to anything I cannot select it and activate it.
To respecify the origin I will need to activate the oridinate set, but since none of the dimensions are associated to anything I cannot select it and activate it.
JohnRBaker
Mechanical
Even if you have an Ordinate Dimension set whose origin is no longer associated to anything, you should be able to go into...
Insert -> Dimension -> Ordinate...
...and the origins of ALL existing Ordinate sets should be displayed and if you select the origin symbol for even a non-associated Ordinate set, you should be able to define a new origin.
And if that doesn't work, try this.
Create a new Ordinate Dimension set selecting the desired new origin. Once you've created it and defined your new margins, leave that tool and go to...
Edit -> Annotation -> Ordinate Dimension...
And when this dialog comes up select the first option, 'Merge Ordinate Sets' and when the list comes up select first the new Ordinate set you just created and then the 'broken' set and hit OK. This should merge the two sets together and now all the dimensions should be fully associative again.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Insert -> Dimension -> Ordinate...
...and the origins of ALL existing Ordinate sets should be displayed and if you select the origin symbol for even a non-associated Ordinate set, you should be able to define a new origin.
And if that doesn't work, try this.
Create a new Ordinate Dimension set selecting the desired new origin. Once you've created it and defined your new margins, leave that tool and go to...
Edit -> Annotation -> Ordinate Dimension...
And when this dialog comes up select the first option, 'Merge Ordinate Sets' and when the list comes up select first the new Ordinate set you just created and then the 'broken' set and hit OK. This should merge the two sets together and now all the dimensions should be fully associative again.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #6
- Status
