Nozzle Schedule

[MOHAMMED89]

Dear Friends,

i have one doubt regarding the selection of nozzle (Pipe neck & Flange) schedule for the API 650 Storage Tanks nozzles.

How to select the schedule of the nozzles?
from API 650, Table 5.6a & 5.6b we will get the Nominal Thickness of Flanged Nozzle Pipe Wall, So with respect to this how will select the schedule.

Thanks in Advance.

 

[khunmyomin]

Hi Mo,
You choose the respective Pipe Schedule based on ASME B36.10.
Hope this help.

 

[IFRs]

If you are building an API 650 tank, use the pipe wall thicknesses and grades in API 650. The thicknesses in tables 5.6a and 5.6b typically correspond to "extra-strong" pipe which is often but not always schedule 80. Also, see note A in the tables.

 

[MOHAMMED89]

Dear Khunmyomin & IFRs,

Thanks alot