Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NOZZLE-PRO & FEATOOLS SHOE DESIGN

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
I would suggest you to write this in both CAESAR II and Paulin (PRG) web sites. It may be resulted by the square of inch-foot conversion unintentionally.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question
Pipe Shoe temperature profile
Replies
2
Views
3K
TomLee777
TomLee777
K
  • Question
Clamped Shoe Support (Clamp orientation) 1
Replies
4
Views
3K
ilovechickens
ilovechickens
FlashPurp
  • Locked
  • Question
Excessive Pump Suction Nozzle Loads 1
2
Replies
23
Views
11K
FlashPurp
FlashPurp
nikolastrojman
  • Locked
  • Question
Allowable Nozzle Loads for PE Tanks 1
Replies
6
Views
597
NW_Wash_Eng
NW_Wash_Eng
TomoB
  • Locked
  • Question
Pipe shoe thermal displacement/movement - limitations 2
Replies
15
Views
1K
1503-44
1503-44

Part and Inventory Search

Sponsor

Back
Top Bottom