Note Symbols 1

[macduff]

Hello,
I was wondering if can modify frames around the note symbols. If any can point me where the code is, I can go in and modify it.

See link for an example:

http://groups.msn.com/MAI-Engineering/shoebox.msnw?action=ShowPhoto&PhotoID=2

Thanks,

Macduff
Meggitt Airdynamics Inc.

 

[MadMango]

Take a look here for some further discussions.
thread559-42918

Ray Reynolds
"Computers in the future may weigh no more than 1.5 tons."
Popular Mechanics, forecasting the relentless march of science, 1949
Have you read faq731-376 to make the best use of Eng-Tips Forums?

 

[SBaugh]

I believe that was hardcoded into the program. They have many different frames around the symbols. If none of those work then maybe you should put and ER in to SW on what symbol frames you need?

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

If you are in the SW Forum Check out the FAQ section

To make the Best of Eng-Tips Forums FAQ731-376

 

[macduff]

Scott,
MadMango's link to the thread helped me out. I spent about 2-1/2 hours yesterday adjusting the code in Gtol.sym file.

See Link for example:

http://www.msnusers.com/MAI-Engineering/shoebox.msnw?action=ShowPhoto&PhotoID=3

Look at difference in the frames.



Macduff
Meggitt Airdynamics Inc.