Hello, good day! I just want to ask if is it possible not to apply hooks on top beam to support a stair as well as hooks for the main bars on the side? It has its own foundation. We did forgot to put some dowels before concrete pouring so is it possible for us to just drill it and put concrete epoxy or might as well remove it to replace with another beam, half of its length is cantilevered and half is fully supported. The top of the stair is 1 meter only from the FFL.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
No anchorage
- Thread starter Annie124
- Start date
Lomarandil
Structural
It may be possible to drill and epoxy bars in. This will depend on your epoxy product and how deep you can drill.
However, you need to get this approved by the original designer, not by us on the internet.
However, you need to get this approved by the original designer, not by us on the internet.
- Status
Similar threads
- Question
- Question
