Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

New Y14.5-2009 & Y14.8 symbols for Solidworks 2009?

Status
Not open for further replies.
ptruitt

ptruitt

Mechanical
Joined
Nov 13, 2007
Messages
233
Location
US
I want to use the Y14.5-2009 4.24.6 "Movable Datum Target Symbol" and the Y14.8-2009 3.14.2 "All Over This Side of the Parting Line" symbol with my 2009 version of Solidworks. I guess I could create a block, but maybe there is a better way. Does anyone know if this is doable? If so, please point me in the right direction.

Peter Truitt
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Joel_Lapointe
  • Locked
  • Question Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
IdanPV
  • Locked
  • Question Question
Apply Moments in Solidworks Simulation
Replies
2
Views
2K
IdanPV
IdanPV
Anurag K
  • Locked
  • Question Question
Modeling clamping effect in SolidWorks FEA
Replies
2
Views
1K
FEA way
FEA way
Joel_Lapointe
  • Locked
  • Question Question
Impose mesh coordinates multiple different simulations (SolidWorks Simulation)
Replies
2
Views
1K
Joel_Lapointe
Joel_Lapointe
IdanPV
  • Locked
  • Question Question
Create Custom Results Plot in Solidworks
Replies
2
Views
1K
IdanPV
IdanPV

Part and Inventory Search

Sponsor

Back
Top