Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Negative hoop stress

Status
Not open for further replies.
Sushil Kuwar

Sushil Kuwar

Mechanical
Joined
Sep 17, 2018
Messages
1
Location
IN
thread569-296825
I am working on a silo design. While finding hoop stress, ANSYS is giving me negative values also. I am not getting the meaning of negative values. The forces applied are radially outward and vertically downward.
 
Status
Not open for further replies.

Similar threads

Sarikahirpara
  • Locked
  • Question Question
Negative Temperature values due to friction between gears.
Replies
0
Views
492
Sarikahirpara
Sarikahirpara
LS_SMS
  • Locked
  • Question Question
Zero Through-Thickness Bending Stress
Replies
9
Views
1K
TGS4
TGS4
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
shiraz883
  • Locked
  • Question Question
Nodal forces and Von-mises stress
Replies
0
Views
427
shiraz883
shiraz883
shiraz883
  • Locked
  • Question Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
486
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top