Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Negative hoop stress

Status
Not open for further replies.
Sushil Kuwar

Sushil Kuwar

Mechanical
Sep 17, 2018
1
thread569-296825
I am working on a silo design. While finding hoop stress, ANSYS is giving me negative values also. I am not getting the meaning of negative values. The forces applied are radially outward and vertically downward.
 
Status
Not open for further replies.

Similar threads

Sarikahirpara
  • Locked
  • Question
Negative Temperature values due to friction between gears.
Replies
0
Views
420
Sarikahirpara
Sarikahirpara
LS_SMS
  • Locked
  • Question
Zero Through-Thickness Bending Stress 1
Replies
9
Views
1K
TGS4
TGS4
W
  • Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
1K
weldtest12
W
shiraz883
  • Locked
  • Question
Nodal forces and Von-mises stress
Replies
0
Views
301
shiraz883
shiraz883
shiraz883
  • Locked
  • Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
337
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top Bottom