Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Torsional Stiffness spreadsheet 1

Status
Not open for further replies.
sprintcar

sprintcar

Mechanical
Oct 16, 2001
763
I've got the formulas but thought one of you guys might have something trick or a website out there.
Thanks! Keep the wheels on the ground
Bob
showshine@aol.com
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Henrique Orlandini
  • Question
Interpretation of bolt threaded and unthreaded length for Member Stiffness calculation
Replies
6
Views
2K
Henrique Orlandini
Henrique Orlandini
Dat Tran
  • Locked
  • Question
JIB CRANE LOAD TEST FAIL, NEED ADVISE 6
2
Replies
34
Views
2K
mfgenggear
mfgenggear
freerangequark
  • Locked
  • Question
Pressed dowel pins and the need to vent
Replies
12
Views
2K
tygerdawg
tygerdawg
Norse1957
  • Locked
  • Question
Just need to vent off a little steam... 1
Replies
3
Views
316
CWB1
CWB1
D
I need a Class 1 division 1 approved cable gland for both USA and Canada. And at the end of the cable there is a Molex connector.
Replies
0
Views
984
denuwan
D

Part and Inventory Search

Sponsor

Back
Top Bottom