need help on filleting using solidworks 2004 2

[ngkw1]

Hi. I am new here and I hope someone can help in this.
I am not able to fillet a corner (a point) for a part i.e.
a point where 3 surfaces meet. I can chamfer the corner though as the vertex selection is available. I would appreciate very much if anyone can help me in this. Thank you.

 

[ngkw1]

I am sorry I think the chamfer approach proposed by CorBlimeyLimey is also facing similar problem as vertex
is not an option to be selected. I tried that and it ends
up well, very different.

 

[ctopher]

Time for Enhancement Request's.

Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-05)

 

[ngkw1]

enhancement request?? What's that ctopher?

 

[ctopher]

http://solidworks.com/pages/services/subscription/enhancements/index.html?pid=383

You can turn in a Enh Req to SolidWorks for anything new you would like to have or need changed.

Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-05)

 

[ngkw1]

That's great. Thanks ctopher.