Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need help on 1 in pierce condition.

Status
Not open for further replies.
Mitzme

Mitzme

Industrial
Joined
Jul 20, 2016
Messages
1
Location
US
Need help on 1 in pierce condition. Running p9013h100 pierce. Was working just fine. Then,,, got this error message p00500. My p9013h75 works just fine as do all the rest. Changed everything to mirror 9013h75 in the 9013h100 still nothing. Help pulling hair out.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
enginesrus
  • Question Question
What is the latest on high power?
Replies
0
Views
7K
enginesrus
enginesrus
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Trln
  • Locked
  • Question Question
BYSTRONIC Bysoft 7, Center punch marks automatically engraved on parts
Replies
0
Views
872
Trln
Trln

Part and Inventory Search

Sponsor

Back
Top