Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need help for 3mm thick Aluminium Cutting 1

Status
Not open for further replies.
VipulAkabari

VipulAkabari

Mechanical
Joined
May 20, 2016
Messages
3
Location
IN
Hi Friends..
Hope all have a nice day..
I have Amada 3015NT 4KW Laser machine, I try to cut 3 mm thick Aluminium with air, but i found some hard burrs and some time it reflect.
Please suggest me for reduce burrs..
 
Sort by date Sort by votes
If you have the option to use nitrogen I would. Use a 3.0 nozzle with 8 to 9kg for gas pressure .02 nozzle gap and a focus of -.080 start with 130 ipm.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
522
IRstuff
IRstuff
Hans H.
  • Locked
  • Question Question
Anti spatter for laser cutting?
Replies
1
Views
1K
Rex Hang
Rex Hang
Pablo_Garcia
  • Locked
  • Question Question
Seeking Guidance: Choosing the Right Laser Cutting Machine for Beginners
Replies
0
Views
946
Pablo_Garcia
Pablo_Garcia
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green

Part and Inventory Search

Sponsor

Back
Top