Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Alt. to Trichloroethane For The Temp. Expansion Of Silcone Tubing

Status
Not open for further replies.
opseng

opseng

Mechanical
Feb 1, 2002
1
My company currently uses 1,1,1-trichloroethane to temporarily expand 11mm diameter silicone tubing to fit around a 13mm diameter needle. I am looking for a safe alternative to this hazardous chemical that will basically temporarily expand the silicone in the same manner (w/o any damage). Any suggestions?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Have you tried dipping the end of the tubing in boiling water?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

BSMEclassof2012
  • Question
Premature Deterioration of Ozone Diffuser Gaskets – Request for Support
Replies
3
Views
3K
btrueblood
btrueblood
ritesh bindal
  • Locked
  • Question
Doubt in the represntation of the PID Controllers in P&ID diagram
Replies
1
Views
1K
Heaviside1925
Heaviside1925
1946ladjal
  • Locked
  • Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
1K
1946ladjal
1946ladjal
Jainitin
  • Locked
  • Question
Need Help
Replies
2
Views
352
Jainitin
Jainitin
AlpanaSlo
  • Locked
  • Question
How to achieve a uniform hardness value in the surface of polyurethane material
Replies
2
Views
462
JAE
JAE

Part and Inventory Search

Sponsor

Back
Top Bottom