Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NDT for wind mills.

Status
Not open for further replies.
picardo

picardo

Industrial
Joined
Jan 15, 2003
Messages
1
Location
DE
Hello!!

I am working in a I&D company, I am doing the bench marking work right now and will be very interested on knowing other companies that use Thermography ( with IR) to prevent stress and cracks in fibre-glass and other materials.

Thank you for your help
 
Status
Not open for further replies.

Similar threads

Burner2k
  • Locked
  • Question Question
Defect Characterization for NDT
Replies
2
Views
752
WKTaylor
WKTaylor
vinguy
  • Locked
  • Question Question
Compressed Air vs Nitrogen for Autoclave Cures
Replies
5
Views
2K
georgeverghese
georgeverghese
Cisnerjo
  • Locked
  • Question Question
Plaster Mandrels alternative materials for washout mandrels (fiber glass air ducts)
Replies
2
Views
993
Cisnerjo
Cisnerjo
Oluwakay
  • Locked
  • Question Question
HOW TO OBTAIN ORTHOTROPIC PARAMETERS FOR A FIBER REINFORCED COMPOSITE
Replies
2
Views
1K
Oluwakay
Oluwakay
wc.waldemar
  • Locked
  • Question Question
Design allowable value knockdown for wet layup
Replies
4
Views
691
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top