Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NC Sheetmetal Flip part

  • Thread starter Thread starter vandewinckel
  • Start date Start date
V

vandewinckel

Guest
Good Morning


We're evaluating Nc Sheetmetal and I ran into a problem with material thickness. I found the option to turn off the warning dialog box and it lets my use the automation to load the parts. Then I was trying to arrange the parts. When I selected a part to allow it to flip it told me that it could not flip part with different material thickness. The Partthicknessranged from .312 to .313. Is there a way to override the thickness to allow flippingof aparts?


Thanks


Steve
 
You must log in or register to reply here.

Similar threads

freerangequark
  • Locked
  • Question Question
Error in start part relations
Replies
15
Views
2K
freerangequark
freerangequark
freerangequark
  • Locked
  • Question Question
Model Tree, tracking part identity
Replies
2
Views
2K
geesaman.d
geesaman.d
Mras
  • Locked
  • Question Question
Creo part tolerance (point coincidence tolerance)
Replies
1
Views
1K
3DDave
3DDave
DesEng1986
  • Locked
  • Question Question
Part Modelling Datums
Replies
0
Views
304
DesEng1986
DesEng1986
M
Create a part or view
Replies
1
Views
2K
msiva1981
M

Part and Inventory Search

Sponsor

Back
Top