Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NASTRAN - MFLUID virtual mass

Status
Not open for further replies.
frluga

frluga

Marine/Ocean
Joined
Sep 3, 2009
Messages
10
Location
IT
Hi all,

how can i obtain the amount of considered added mass in the analysis by the MFLUID to my structure in a dynamic analysis.
I guess i have to ask with some diag or param and then see the output in the f06. But which one?

So let's say i have a floating object in water, and i want to perform a natural freq analysis.
I add the MFLUID to the submerged area. And i want to know the considered virtual mass due to this.

Thanks for any response :)

 
Status
Not open for further replies.

Similar threads

vanji1
  • Question Question
Nastran sol 106
Replies
1
Views
623
sdm919
sdm919
sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan
S
  • Question Question
Changing Nastran .f06 file Format
Replies
2
Views
2K
rb1957
rb1957
ghylander
  • Locked
  • Question Question
Use of MFLUID for external fluid field
Replies
0
Views
1K
ghylander
ghylander

Part and Inventory Search

Sponsor

Back
Top