I'm using SOLID EDGE ST, and I've been trying to get the stator on my compressor to rotate. But I can't. I can only rotate the Rotor Blades, and the nose gaurd. How can I get the stator to rotate as well. I put my motor on the stator, but when I run the simulation nothing happens.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
My motors won't rotate.
- Thread starter Geno678
- Start date
- Status
Similar threads
