my icons all changed to little boxes, what happened

[tsorel]

The other day SW03 crashed on me when saving a largish assembly. Now all the file icons show up as the little yellow blocks and not the mini preview that is so neat. What happened? Thanks
-todd

 

[SBaugh]

Is "Show thumbnail graphics in windows explorer" checked in tools\options\system options\general ?

Regards, Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.3dmca.com

faq731-376
When in doubt, always check the help

 

[tsorel]

sure is, that's why it's weird.
-todd

 

[SBaugh]

Try turning it off (the option) and shut down SW. Then bring SW back up, and re-check that option and close SW. Then see if that works.

Best Regards, Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.3dmca.com

faq731-376
When in doubt, always check the help

 

[tsorel]

ok, I downloaded and installed the 1.1 service pack and it fixed that problem. I wonder what others it created? Thanks for your help.